Category : Electrical and electronic equipment & instrumentations > Electrical protection devices, fuses

PRINT

BACK

National Instruments New PXI Instrument Combines Functionality of LCR Meter, 6½-Digit Multimeter and Isolated Digitiser.

National Instruments new high-performance, multifunction NI PXI-4072 FlexDMM gives engineers the functionality of three common instruments in a single-slot 3U PXI module – a 6½-digit multimeter, an LCR (inductance and capacitance) meter and a 1.8 MS/s isolated digitiser. The NI PXI-4072 FlexDMM brings digital multimeters one step closer to providing universal measurement capability by offering engineers the 20 most common test measurements, including voltage, current, capacitance, inductance,temperature and resistance. By integrating these measurements into one PXI module, engineers reduce test system size and cost, increase throughput and shorten test development time.

The new module builds on the company’s NI PXI-4070 FlexDMM by adding inductance and capacitance. In the new measurement mode, the FlexDMM offers 0.25 percent basic accuracy for both inductance and capacitance measurements. As a digital multimeter, the FlexDMM delivers fast and accurate 6½-digit DC voltage and current, resistance measurements and
true-rms AC voltage and current. In the high-voltage isolated digitiser mode, the FlexDMM can acquire both AC and DC-coupled voltage and current waveforms up to ±300 V and ±1 A input at a maximum sample rate of 1.8 MS/s.
The FlexDMM is ideal for a variety of applications including component screening and cable capacitance testing in industries such as semiconductor, automotive, consumer electronics and aerospace/military.

Engineers can quickly increase the channel count of their FlexDMM system by integrating with NI switch modules, such as the NI PXI-2532, a 512-crosspoint high-density matrix. When engineers use the FlexDMM with NI switch modules and NI Switch Executive switch management software, they can measure thousands of channels with a single multimeter. The NI PXI-4072 FlexDMM comes with NI-DMM driver software that is optimised for use with NI LabVIEW, LabWindows/CVI and Microsoft Visual Studio .NET.

About NI Modular Instruments

NI modular instrumentation combines high-performance hardware, flexible software and innovative timing and synchronisation technology for test and design applications. NI modular instrumentation includes:

· High-resolution digitisers (eight to 14 bits, up to 200 MS/s)
· Signal generators (up to 16 bits, 200 MS/s)
· Digital waveform generator/analysers (up to 100 MHz)
· Digital multimeters (up to 6½ digits)
· RF vector signal generators and analysers (up to 2.7 GHz)
· Dynamic signal analysers (up to 24 bits, 204.8 kS/s)
· Switching (multiplexers, matrices and general purpose)

List of all articles from this supplier

- National Instruments Introduces New Line of HMIs for LabVIEW
- National Instruments has announced NI LabWindows/CVI Version 8.0
- NI PCIe-1430 frame grabber from National Instruments
- NI announces Analog Devices’ ADIsimADC analogue-to-digital converter (ADC) modeling software
- National Instruments Drives Data Acquisition Innovation with Industry’s First PCI Express Multifunction DAQ Devices
- New NI Toolkit Delivers Measurement and Calibration for Electronic Control Units

List of all articles from this supplier

List of articles in this sub-category

- FS725 Benchtop Rubidium Frequency Standard
- SIM900 flexible platform
- SLD dual input modular electronic loads
- TrueWave ideal for testing electronic equipment
- 2200 and 5000A isolators
- 88000 Series ATS-620 Array Test System

List of all articles in this sub-category Electrical protection devices, fuses

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category