Category : Vibration control equipment, optical tables > Vibration control equipment

PRINT

BACK

This is an inexpensive means of isolating your microscope scanner from building vibrations, interior acoustical noise, and the thermal drift in the probe’s position caused by air drafts. Isolation is achieved by placing the microscope on top of a heavy mass supported by soft springs within a closed chamber. The interior walls of the chamber are covered by acoustic dampening foam. The isolation achieved is sufficient to suppress normal environment noise at frequenies above 1Hz. This option is highly recommended for all SPM instruments.

List of all articles from this supplier

- Nomad scanning probe microscope
- Universal SPM Scanning probe microscope
- Q-Scope 400 scanning probe microscope
- Q-Scope 250 scanning probe microscope

List of all articles from this supplier

List of articles in this sub-category

- Standard Wire Rope Isolators
- Electro-Damp® for the control of pneumatic vibration isolation systems
- Type II Faraday Cage
- STACIS® 2100 Active Piezoelectric Vibration Control System
- Mag-NetX Magnetic Field Cancellation System
- Faraday Cages electro-magnetic isolation system

List of all articles in this sub-category Vibration control equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category