Category : Laser components, systems, equipment and applications > Laser components and systems

PRINT

BACK

The ATM is a series of Automated Tuning Modules based on LTB's former dye lasers UDL and frequency doubling units SHG.

When the ATM is combined with one of LTB's nitrogen lasers MNL as a pump source, the result is a fully automated laser system, delivering sub-nanosecond pulses in the UV-VIS-NIR range.

Both components, the nitrogen laser MNL and the ATM, are controlled by a PC via a comfortable windows software.

The compact device set-up has a single beam output and can be equipped with a fibre coupling. The following settings can be made via the software interface:


337 nm direct output from the nitrogen laser
400 nm - 900 nm dye laser
225 nm - 400 nm dye laser and SHG1


The ATM is supplied with an energy monitor for the monitoring of the energy output.

A 16/32 DLL interface allows the software to be integrated into other systems.


The ATM is available in different versions:

Broad band
The ATM 100 is based on a broad band dye laser ( 5nm - 8nm ) and has a typical degree of conversion of 30%.

Tunable
The ATM 200 model have a continuously tunable wavelength range from 400 nm - 900 nm.

Frequency doubling
The ATM-UV 1 are units containing dye lasers and frequency doublers, thus covering the tuning range from 225 nm to 900 nm.

List of all articles from this supplier

- MNL-100 Mini Nitrogen Laser
- MNL-200 Midi Nitrogen Laser
- Laser Induced Multi Emission Spectrometer
- Demon spectrometric system

List of all articles from this supplier

List of articles in this sub-category

- TTS series Laser system designed for vision system applications
- C1000E laser system
- Industrial Fibre Lasers
- 1550nm Compact Fiber Laser System
- CAPRIS CP2 Twin Coil Pan System
- Sienna 55 laser wire stripper

List of all articles in this sub-category Laser components and systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category