|
Category : Environmental measurement, test and control equipment > Gas generators
Calibration Gas Generators
|
|
 |
| PRINT |
|
 |
| BACK |
|
The customer wants to generate a 9 different sulfur compound blend in the 0,1 mg/m3 to 50 mg/m3 range, balance is methane . Solution : - Sources : 8 compounds are generated through 16 permeation tubes for high and low levels, for the last compound we use a permeation tube for low levels and a cylinder for high levels . - 3 different furnaces at different temperatures are used for the permeation tubes . The flow regulation for these furnaces is done through 2 Mass Flow Controllers . - The blend coming from the permeation chambers and the cylinder are then diluted with a dilution system .
Article from CALIBRAGE SARL
List of all articles from this supplier
- PPA 2000 portable calibrator designed to use sources such as permeation tubes
- Minibump electrochemical calibration gas generator
- PRV 21 pressure regulator
- Midispancan Calibration Gas Cylinders
List of all articles from this supplier
List of articles in this sub-category
- PPA 2000 portable calibrator designed to use sources such as permeation tubes
- Minibump electrochemical calibration gas generator
- Midispancan Calibration Gas Cylinders
- Special applications gas standards generators
- Field portable gas standards generator
- Industrial gas standards generator
List
of all articles in this sub-category Gas generators
List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category
|