Category : Sensors, probes, transducers > Torque and force measuring devices (sensors, transducers..)

PRINT

BACK

Using the CENTOR technology, the CENTOR W Easy digital torque gauges have a very large graphic display and show a maximum quantity of information for more efficient measuring: they show the current reading and the peak value at the same time, and a bar graph to show the operator whether they are close to their maximum capacity. If necessary, the backlighting can be used to further enhance reading comfort.Its advanced measurement chain enables it to use an sampling rate of 1 000 Hertz with a resolution of
1/10 000 FS and a total error of less than 0.5% FS. Many other functions complete the possibilities of the gauge:
the Set points functions can be used to carry out “OK, NOK” tests: a symbol is shown on the display.
The fully programmable RS232 output sends the data to a PC.
A digimatic output can be used to feed Mitutoyo statistical printers.

With “cylindrical” sensor: used to measure torques when the sensor has to be integrated in an assembly.

List of all articles from this supplier

- Centor W Star versatile torque gauge
- Centor W Easy digital torque gauge
- Centor W Star torque gauge
- Centor Star force gauge

List of all articles from this supplier

List of articles in this sub-category

- Model 86402 Torque Sensor
- Centor W Star versatile torque gauge
- Centor W Easy digital torque gauge
- Centor W Star torque gauge
- Centor Star force gauge
- C9B compact force transducer

List of all articles in this sub-category Torque and force measuring devices (sensors, transducers..)

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category