Category : Environmental measurement, test and control equipment > Chlorine controllers

BUYER'S GUIDE

PRINT

BACK

Exclusively developed for swimming pools water measurements, the BAMOCHLOR is an easy-to-use indicator / transmitter designed as a panel or wall mounting unit. Calibration and configuration is easy. Two independent adjustable set-points with opposite or same control direction are integrated. The unit has a selectable 0 or 4 to 20 mA analog output. As an option the unit is available with a galvanic isolated mA Output. The mA output signal can be set over the measured range. Different setting modes can be programmed with dip-switches by removing the gray front panel. The BAMOCHLOR is equipped with removable wiring connectors.

- Digital LCD display
- 2 ranges selectable
- 0 - 1 ppm or 0 - 5 ppm of Cl2 free
- 0 - 4 to 20 mA output selectable
- 2 Volt free output relays for alarm setting
- 72 x 144 mm IP 40 enclosure box
- or IP 55 wall mounting

List of all articles from this supplier

- SP 820 jet pumps
- CDA / CDV SERIES flow indicators
- Measuring systems designed for acid or base concentration measurement
- EchoTREK for ultrasonic level measurement

List of all articles from this supplier

List of articles in this sub-category

List of all articles in this sub-category Chlorine controllers

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category