Category : Motion control, positioning stages > Bearings

PRINT

BACK

Advantage of the Combined Bearing Systems
Reduces your designing and production costs.
Can take up high radial and axial loads.
Strong profiles for high stat. and dynamic loads.
Best dispersion of forces in the profiles.
Longer lifetime for bearings and profiles.
Economical assembling by welding bolt.
Bearing components are easily exchangeable.
Technical characteristics
outer rings are made of case-hardened steel UNI 16 CrNi 4 hardened at 62+2 HRC
inner rings are made from bearing steel EN 31-SAE 52100 hardened at 62-2HRC
cylindrical rollers have flat ground heads, made from EN 31-SAE 52100 steel hardened at 59÷64 HRC
welding bolts are made from UNI FE-510.C
bolt tolerance -0.05 mm
Bearings from 4.055 to 4.063 are relubricateable.
Bearings are lubricated with grease grade 3
(e.g. Shell Alvania 3, Esso Beacon 3).

List of all articles from this supplier

- Hardened LM guides for robots
- Rigid steel profiles with precision bearings
- Type SLE - 2 Steel-linear-unit
- Lift systems

List of all articles from this supplier

List of articles in this sub-category

- Series LER bearings
- Series LEL Bearings
- Rigid steel profiles with precision bearings
- 40mm Aluminum Ball Bearing Stage
- Linear Bearings and Carriage Assemblies--TRCA series
- End bearings & flange accessories

List of all articles in this sub-category Bearings

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category