Category : Automation, process control equipment, industrial communications > Industrial communications equipment

PRINT

BACK

The ComuCont is a compact industrial modem that is primarily suitable for the transmission of measuring values.
General:
Mounting: Top hat rail mounting, field/wall installation housing, counter standard lid, electric connection via clamps 2.5 qmm
Operating temperature: -10°C up to 55°C
Relative humidity: 5% up to 95% (non-condensable)
Display: LED-Display
System: Real Time Clock (RTC), processor for control (16Bit CPU)

Data transmission:
Transmission: Dualband, at 900MHz 2Watt, at 1800MHz 1Watt
Data rate: with GSM 9.600 Bit/s, with GPRS 9.600-50.000 Bit/s
Transmission security: V.42/V.42bis error correction method, RLP ¡V
Radio Link Protocol
Inputs / outputs: 6 signal inputs, 5 outputs, optional 1 relay output

Hardware:
Power supply: 84 up to 265V AC/DC, 50/60Hz, <8VA (protection II)
Supply to external appliances: +24V / 20mA (unregulated),
+5V / 50mA (regulated)
Interfaces: RS 232, RS 485 or CL (TTY 20mA) according to EN 61107

List of all articles from this supplier

- MFT 830 terminal for data acquisition
- Vehicle Mount Terminals
- Assembly of electronic components and appliances
- Automation division

List of all articles from this supplier

List of articles in this sub-category

- 386EX processor at 33 MHz
- PC104 STPC VGA graphic controller
- Master BB multidecoder connectable to different interfaces
- SBC PICMG 1.0 for Intel Pentium
- Brios2 powerful fieldbus-based I/O system
- aX 2-Channel Profibus Card

List of all articles in this sub-category Industrial communications equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category