|
Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Level sensors, detection & measurement
Contact protection relay for signalling a limit level
|
|
 |
| PRINT |
|
 |
| BACK |
|
KR 5 A -for signalling a limit level (1 contact) or -for two-point control (2 contacts)
Alternative supply voltages AC versions : terminals 15 + 16; DC versions : terminal 15 = - terminal 16 = + : - AC 230 V (delivered if no other supply voltage is specified in the order) or - AC 240 V or - AC 115 V or - AC 24 V
- DC 24 V or - DC 12 V (in these two cases, the unit must only be connected to a low safety voltage which corresponds to the safety regulations relating to the application)
- further supply voltages on request
Power input: approx. 3 VA Control circuit (terminals 1,6,7): 3 terminals (safety extra low voltage SELV) acting on 1 relay with self-hold - no-load voltage: DC 8.4 V - short-circuit current: < 10 mA - response hysteresis: 1.5 mA to 1.8 mA Controlled circuit (terminals 9,10,11): 1 potential-free changeover contact with self-hold Principle: working current principle Switching status indicators: - 1 green LED lights when relay is energised - 1 red LED lights when relay is not energised
Power input approx. 3 VA Switching voltage AC max. 250 V Switching current AC max. 4 A Switching capacity AC max. 500 VA Housing insulating material, 75 x 55 x 110 mm Connection: terminals on top of housing Protection class: IP 20 Mounting: clip attachment for U-bar to DIN 46 277 and DIN EN 50 022 or fastening via two boreholes
Mounting orientation any Temperature resistance - 15° C to + 60° C
List of all articles from this supplier
- Electrode relay for level control
- Rod electrode for use in potentially explosive atmospheres
- SDS/PP for the automatic control of non-aggressive liquids
- Rod electrode for automatic level control
List of all articles from this supplier
List of articles in this sub-category
- Enhanced Jupiter® Magnetostrictive Level Transmitters
- Atlas™ Magnetic Level Indicator
- Model T10 Float Level Switch
- Model B73 Sealed External Cage Liquid Level Switches
- Top Mounting Displacer
- APM Pneumatic Modulevel For Boiler Feed Systems
List
of all articles in this sub-category Level sensors, detection & measurement
List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category
|