Category : Machine tools, cutting, molding, machines, precision machining > Crimping machines

PRINT

BACK

Fully Automatic Crimping Machine
The CrimpCenter 65 is a fully automatic swivel arm crimping machine with 4 processing stations. At a maximum feed rate of 12 m/s (39.4 ft/s), the CrimpCenter 65 allows high-quality crimping, sealing, twisting and tinning of wires from 0.15 to 6 mm² (25 - 10 AWG).

With the optionally available thin & short wire processing kits, the CrimpCenter 65 easily processes wires down to 0.05 mm² (30 AWG) and 35 mm (1.38'') length.

Various configuration possibilities provide for maximum flexibility and allow processing with up to 3 crimping stations. In combination with the double gripper module SLD 4000, horizontal and vertical doubling crimps with 3 different contacts are possible.

Minimize Setup Time - Maximize Productivity
Productivity of a fully automatic cut strip terminate machine is more than just speed. Short setup and change-over times can significantly increase your output.

With Schleuniger's innovative ToolingShuttle 60, setup and change-over of a crimping station doesn't take more than 30 seconds. Depending on how often you change applications, this system increases your productivity by 30% and more.

List of all articles from this supplier

- CoaxStrip 5300 MX Programmable Micro Coaxial Cable Stripping Machine
- StripCrimp PP3 pneumatic machine for stripping and crimping wires
- FiberOptic 7010 Kevlar Cutting Machine
- PowerStrip 9500 Automatic Wire Cut & Strip Machine

List of all articles from this supplier

List of articles in this sub-category

- StripCrimp PP3 pneumatic machine for stripping and crimping wires

List of all articles in this sub-category Crimping machines

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category