Category : Motion control, positioning stages > Actuators

PRINT

BACK

Cylindrical actuators with integrated alignment elements replace external mechanical positioning elements for position verification. The distribution of alignment elements on the cylinder walls allows it to be tilted freely around three axes, enabling the two end faces of the actuator to be positioned precisely in relation to one another. Alignment is achieved using a pulsed Nd:YAG laser. Each pulse produces a deformation in the structure, causing the end face to turn around one axis. The deformation action is based on the mechanism of laser-induced compression

List of all articles from this supplier

- Cladding of Cutting Areas with Polymers
- Annular Diode Laser Beam
- Position-sensitive diode
- 2D/3D Seam Tracking of Laser Welding

List of all articles from this supplier

List of articles in this sub-category

- EPM 37-48 portal actuators
- ELM23-37 linear actuators
- FHA series AC hollow-shaft servo actuators
- FFA series servo actuators
- ICS A3 Three-Axes Integrated Combination System
- SS Series actuators

List of all articles in this sub-category Actuators

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category