Category : Cameras, image sensors, imaging systems, scanners, thermography, UV viewers > Image sensors (CCD, CMOS..)

PRINT

BACK

Features
The electronics module converts the video current
pulses originating from the diode array to voltage
pulses. As input signal source, the 'active video' or the
'active minus dummy video' may be selected via solder
gap BR2. The 'active minus dummy video' signal is the
default factory setting.
The digital clock signals for controlling the array are
converted from TTL or CMOS (HC) level to the levels
required by the photodiode array. The module is factory
preset for a diode array type S3904.
For different types of arrays, components R4, R12, C7
and C13 have to be replaced (see below)!

List of all articles from this supplier

- PGS 1.7 Plane Grating Spectrometer
- MMS 1 Monolithic Miniature Spectrometer
- TFM-1 LensColour Analyser
- CompactSpec® II UV-VIS spectrometer system

List of all articles from this supplier

List of articles in this sub-category

- DVT Legend 520 image sensor
- VisionSensor CT125 sensor for fast and reliable test applications
- FIRST hyperspectral-imaging sensor using FT-IR technology
- Electron multiplication CCD sensors
- Enhanced Linescan Image Sensor
- LIS-1024 Linescan Image Sensor

List of all articles in this sub-category Image sensors (CCD, CMOS..)

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category