Category : General industrial equipment, special machines > Nuclear plants components and equipment

PRINT

BACK

Dismantling of defective in-core instrumentation thimbles must be performed due to limited number of parking positions inside the fuel pool.
Due to the high activation level, cutting operations are allowed only under water with tools fitted on poles or by use of remotely operated equipment. The in-core instrumentation lance fingers are cut inside the fuel pool using hydraulic cutters; the shaft and the yoke are cut inside a separate and shielded basin on the reactor floor using hack saws. The cut segments are disposed of in preshielded waste drums. The use of standard 200 liter waste drums limits the size of cut segments

List of all articles from this supplier

- BoP Replacement Components Engineering
- Bwr refueling services
- Atrium 10 fuel assemblies
- Limitorque actuators

List of all articles from this supplier

List of articles in this sub-category

- Ozone Generator
- Filter for eventual flue gases cleaning system
- Gripper for container with hard radioactive waste
- Filter-container designed for liquid waste purification
- Mixing Ejector designed for mixing of liquid radioactive waste solution
- BoP Replacement Components Engineering

List of all articles in this sub-category Nuclear plants components and equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category