Category : General industrial equipment, special machines > Industrial printing and marking equipment

PRINT

BACK

AFLaser has developed the Eco-G machine for specific needs of small size engraving.
- Use of palette: 200x200 mm.
- Autofocus.
- The vision system allow an automatic positioning before marking.
- Light engraving from 0 to 2 mm without deformation due to the tool.
- Beads engraving
- 3D engraving on rings.
- 3D engraving on moulds.
- Coppers or graphite engraving for electrodes.
- Precise cut.
- Light engraving.
- Direct engraving on jewels.
- Satining.
- Numbers engraving for traceability.
This machine is used to realise superficials and deeps carvings on all material types. All type of characters and logos can be engrave.
The vision system is composed of a camera with a generator of electronic cross visualize on the monitor. The vision system is composed of a camera at recognition of form and an intelligent automate which give instructions at the laser for the positionement of the carving on the piece.
The Eco-G is CE marked and is certified as a class 1 laser System
Mechanical specification:
- X axis: 200 mm, precision +/- 0,015 mm.
- Y axis: 200 mm, precision +/- 0,015 mm.
- Z axis: 200 mm, precision +/- 0,015 mm.
- B axis: +/- 360°, precision +/- 0,02 °.
- Manual A axis: 0 to 45°.
Axis:
- Brush less motors and absolute encoders.
- No need to reference.
- Very fast.
- Automatic load compensation.
- Diagnostic program.
Laser:
- Laser NdYag 100 W lamp pumped LN100 or a 50w Diode pumped DN 50.
- Galvanometer laser marking head.
- Focal length of working lens: 163 mm or 100 mm.
- Manual apertures.
- Beam Expander 6x.
Vision system:
- Vision with variable enlarging system from X 7,5 to X 50.
- Generator of electronic cross.
- Measurement of lengths, angles, diameters.
- Possibility to load bitmaps

List of all articles from this supplier

- ECO-C machine for small dimensions parts
- LGM 35 permits processing of complex 3D structures
- ALLPRINT CS : novel laser stroke marker
- VARIO-S machine to mark big products

List of all articles from this supplier

List of articles in this sub-category

- 5000 series workstations for laser marking systems
- 3000 series marking systems
- Built-in units for integration into assembly lines for automatic marking purposes
- Roll marking machines suitable for marking solid cylindrical components
- Type 420 Laser engraver
- Punching machines used for post-inspection stamping and general marking purposes

List of all articles in this sub-category Industrial printing and marking equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category