Category : Measurement, test and control instrumentations > Coating thickness measurement

PRINT

BACK

This simple to use gauge consists of a spring loaded plunger which, when released, strikes the surface with fixed and constant impact energy. During the rebound stroke, the mass moves a pointer that indicates the maximum point of return and at the same time indicates a reference value called Rebound Number.

This number, converted by the correlations available on the hammer, gives the compression resistance value in respect of the impact angle.

Impact Energy 2.207 Nm
Supplied with abrasive stone to prepare test surface
Aluminium body
Rebound value indicated on test hammer
Rebound value chart on body, for quick calculation of compressive strength
Curve selection on chart dependant on testing angle
The concrete hammer, often called a rebound hammer, is supplied with plastic carrying case, grinding stone, calibration certificate and instructions.

List of all articles from this supplier

- Elcometer 1200/4 ISO Continuous Humidity Chamber
- Elcometer 331² Model B Concrete Covermeter
- Elcometer 106 adhesion tester
- Taber 5750 Linear Abraser

List of all articles from this supplier

List of articles in this sub-category

- Eddyscan® 30X TM for coating thickness measurement
- FERITSCOPE® MP30E with plug-in type smart probe
- SIGMASCOPE® SMP10, hand-held instrument to measure Electrical Conductivity
- The Coulometric testing method: COULOSCOPE® CMS STEP- Helmut fischer
- Coating Thickness Measurement with FISCHERSCOPE® X-RAY XDLM®-C4 system - Helmut Fischer
- Fiber Eccentricity Display - CERSA MCI

List of all articles in this sub-category Coating thickness measurement

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category