Category : Electric DC motor, linear motor, stepper motor, transmission, drives & control, cylinder, gearbox > Electronic control cards

PRINT

BACK

Main hardware features
- FPGA for any interfaces to DUT, up to 150 MByte/s
- Numerous interfaces achieved such as to TMS470 Databus, MPC5xxx Databus, EDP / IPD, multiple SPI, Nexus, Flexray
- Additional interfaces, such as CAN, SPI or A/D
- RAM on board up to 8 MByte
- 80 x 60 mm board available
Main software features
- Real-time operating system with TCP/IP stack
- System based on MPC5xx
- CPU load less than 50 % at a continuous data rate of 4 MByte/s
- Standard XCP1.0 interface
- On 100 MBit Ethernet, up top 6 MByte/s
- Firmware update via XCP
- 10 µs time stamps

List of all articles from this supplier

- Electrical machines with bar-shape windings
- Axial Flux Motors
- Short-stroke Actuators
- Linear actuators

List of all articles from this supplier

List of articles in this sub-category

- D/A Receiver Interface Card
- Asc system controller for laser devices, sensors, motor drivers
- MI 452A control card for stepper motors
- SIMPA microstep card : microprocessor based indexer

List of all articles in this sub-category Electronic control cards

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category