Electronic fuse placed in serial mode in the supply of the loop

BUYER'S GUIDE

PRINT

BACK

General features :
The LAB24 is comparable to an electronic fuse placed in serial mode in the supply of the loop. Practically transparent under normal operation, it limits instantaneously the value of the current of loop to 24 mA as soon as an overcurrent occurs then becomes again transparent immediately the failure disappeared.

Mechanical specifications :
- Modular unit with DIN standard clamps, fitted with front screw connectors.
- Size: H: 60 mm, L: 23 mm, D: 75 mm.

Electronical specifications :
- Input: Direct voltage from 8 to 30 VDC.
- Voltage drop : 250 mvolts @ 20 mA.
- Protected against overvoltages and overcurrents.
- Output: Output current from 2 to 25 mA.
- Electronical limitation at 30 mA in case of short-circuit.
- Consumption: 3 mA typical.
- Front panel

Article from HITEC

List of all articles from this supplier

- PIC10 pressure datalogger
- CN515 level switch for level detection
- ALP524 electroluminescent digital display
- CP5 400 pressure transmitter for control of hydraulic pressure on pipe

List of all articles from this supplier

List of articles in this sub-category

- FS725 Benchtop Rubidium Frequency Standard
- SIM900 flexible platform
- SLD dual input modular electronic loads
- TrueWave ideal for testing electronic equipment
- 2200 and 5000A isolators
- 88000 Series ATS-620 Array Test System

List of all articles in this sub-category Electrical protection devices, fuses

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category