Category : General industrial equipment, special machines > Nuclear plants components and equipment

PRINT

BACK

Filter is designed for cleaning of flue gases from the burning furnace for hard radioactive waste, which have been cleaned in scrubber and filter for flue gases cleaning system from hard and liquid fine dispersed (0,1-3 micro m) aerosol particles.
Specifications.
Working load (air filtering capacity) 1000 m3/h
Initial filter resistance in working load 800 Pa
Filter resistance:
- in the conditions of self-cleaning during the fog filtration 3500 Pa
- in the conditions of accumulated dry percipitates
( the percipitate 100 g/m2) 2500 Pa
Efficiency of aerosol dispersed phase catching at the rated air
consumption of 1000 m3/h 99,9 %
Aerosol weight concentration in the gas which is being purified:
- liquid aerosol up to 5 g/m3
- hard aerosol up to 0,5 mg/m3
Overall dimensions of the filter:
- external diameter 1186 mm
- height 1040 mm
Weight 325 kg

List of all articles from this supplier

- Ozone Generator
- Gripper for container with hard radioactive waste
- Filter-container designed for liquid waste purification
- Mixing Ejector designed for mixing of liquid radioactive waste solution

List of all articles from this supplier

List of articles in this sub-category

- Ozone Generator
- Gripper for container with hard radioactive waste
- Filter-container designed for liquid waste purification
- Mixing Ejector designed for mixing of liquid radioactive waste solution
- Dismantling of In-Core Instrumentation Thimbles
- BoP Replacement Components Engineering

List of all articles in this sub-category Nuclear plants components and equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category