Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Flow control

PRINT

BACK

The FLO-PIPE FP 182 single point EM (velocity) flow Sensor is a 1 inch insertion sensor designed to be positioned at the internal pipe wall. Its patented shape sensor head is designed to avoid any hang-ups when used in waste water applications. A site calibration is requested to calculate the exact velocity multiplier to be used for that particular application.
The model FP 182 can be installed under pressure (PN16) using hot tapping tools. For clean water applications, use the model FLO-PIPE FP 180 or FLO-PIPE FP 181. The model FLO-PIPE FP 182 is recommended up to DN 300, for larger waste water pipe diameters use the 2 inch sensor FLO-PIPE FP 282.
Body material is Polyurethane. Electrode material is graphite.
The sensor is supplied in separate version with one of the 3 standard electronics ML 110, ML 210, and the fully Lithium battery operated ML 250 with 5 to 10 years battery life

List of all articles from this supplier

- Model 1000-1PT Flo-Logger
- MS 2500 full bore EM Sensor
- Multi-Mag Insertable Electromagnetic Averaging Flow Sensor
- Multi-mag EM Flow Sensor

List of all articles from this supplier

List of articles in this sub-category

- Trolleys Suitable for fast transport
- Optimal material flows
- Flow Measurement System
- Flowmeter with float principle
- Optimeter flow meter designed to measure the water flow rate
- FFP Series Paddle Wheel Flow Meters

List of all articles in this sub-category Flow control

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category