Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Detectors

PRINT

BACK

This detector gives the alert whenever there is water on the floor.

It can prevent major water damage, and it is particularly useful in high risk locations such as: boiler rooms, cellars, car parks, laundries, kitchens, swimming pool filtration compartments, control rooms, computer rooms, etc

The sensor is of completely static design for total reliability.


Presentation

The Aqualarm Conductivity detector is made up of the following parts :

An electronic receiver placed in a PVC box.
A single 213 647 sensor with a two metre cable.
As an option, it can be provided with an audible warning device (220V bell).

How it works

The «Electronic Receiver» sends out a safety Voltage of 24Veff. to power the «Sensor» which is connected to it and placed on the ground. The electronic receiver is fitted with a relay to provide an alarm, an indication or a command.

List of all articles from this supplier

- Pressure indicators
- Pressure measurement instrumentations
- Level detection on conductive or insulating products
- Simple and economic solution to level detection

List of all articles from this supplier

List of articles in this sub-category

- Stationary monitoring devices for gas detection
- Central unit for gas detection

List of all articles in this sub-category Detectors

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category