Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Cryostats

PRINT

BACK

Connect the highly efficient flexible stainless steel transfer line to the cryostat and the other end into a liquid helium (or nitrogen) storage dewar.

2. Turn the knob that adjusts a precision needle valve and cooling starts. The cryogen flow cools the sample!

3. Attach the built in heater to a temperature controller. Vary temperature as desired. Standard operating range is <2K to 325K; a high temp option can increase the range up to 1000K. Yes, <2 to 1000K in one cryostat!

The RC102 and the RC110 offers the fastest cooldown, highest efficiency and greatest stability in the industry

List of all articles from this supplier

- RC152 cryogenic workstations
- Aluminum Fiberglass Dewars
- Superconducting Magnet System
- SuperVariTemp system

List of all articles from this supplier

List of articles in this sub-category

- ST-500-LN continuous flow cryostat
- ST-500 cryostat for magnetic measurements
- 800K cryostat interface
- LTR-3-110 helitran open cycle cryostats

List of all articles in this sub-category Cryostats

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category