Category : Fiber optics components, systems, photonic instrumentation > Fiber optic instrumentation

PRINT

BACK

The GT10-1310TRU2 is an integrated high-speed data transponder module optimized for OC-192/STM-64 and 10GE applications with and without FEC. A direct modulated 1310 nm laser module and a PIN-detector-based optical receiver module convert data streams between the electrical and optical domains. A high-performance laser driver and receiver amplifiers are incorporated to provide optimum signal levels throughout the assembly. A 16:1 MUX and a 1:16 DEMUX translate the OC-192/STM-64 data rate to multiple signals at STS-12/STM-4 rate. Low-noise clock/data recovery and clock multiplication electronics based on phase-locked-loops yield full SONET compliance for jitter generation, jitter transfer, and jitter tolerance. MSA compatible status and alarm signals are available to allow monitoring of key operating parameters.
The GT10-1310TRU2 is manufactured in a compact 2.2”x 3.0”x 0.53” assembly with an integrated heatsink. The transponder module runs on a quad +5V, +3.3V, +1.8V, and -5.2V supply. All electrical signals are interfaced via a single low profile connector, while the optical signals are provided via fiber pigtails with customer specified connectors

List of all articles from this supplier

- HSD-30 high speed detector
- GT10-5500RX optical receiver
- GT10-1550TRL transponder
- GT10-XFP pluggable module

List of all articles from this supplier

List of articles in this sub-category

- Fiber Optic Spectrum Analyzers
- Connector Reel Cleaner
- VPAC 1000- Wide Bandwidth Preamplifier
- Infrared detectors optimized for any wavelength
- MKIT II Mounting Kit
- Specialty Fluorescent Dyes

List of all articles in this sub-category Fiber optic instrumentation

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category