Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Gas analysis instrumentation

PRINT

BACK

Standards ISO 4260/NF.EN 24260 / ASTM 2784 and 2785 /EN 41


Liquid or gaseous samples mineralisation (essentially petroleum products) for sulphur or chlorine analysis.Possibility of important specimens (several ten cc) allowing very low measurement thresholds (about 1 ppm Sulphur)

Very high level of safety

According to ISO 4260, the stainless burner must be used for light olefins.The titration part has to be determined on the contents to measure (cf ISO 4260).For out-standard mineralisation applications, refer to our MINERALYSEUR.

List of all articles from this supplier

- MIPO 5 servocoulometer: the absolute titration method
- Continuous measurement of Sulphur and / or Nitrogen in gases
- SULF UV - UV Fluorescent organic Sulphur analyser

List of all articles from this supplier

List of articles in this sub-category

- Microwelder gas-generating soldering unit
- CT-1530 designed to operate in pressure ranges from 5 to 200 mBar
- Solartron 3098 gas measurement unit
- Continuous measurement of Sulphur and / or Nitrogen in gases
- Portable unit for monitoring air quality
- Solutions for moisture, oxygen and hydrogen analysis

List of all articles in this sub-category Gas analysis instrumentation

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category