Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Pressure measurement

PRINT

BACK

Gems Sensors 2400 Series immersible pressure transducer has been specifically designed to meet the rigors of long term immersibility. A custom designed hermetic header guarantees that water cannot enter the transducer even if the cable sheath is damaged during use. The large bore vent tube is connected directly to the back of the sensor which provides rapid venting, even on the longest cable run. The sensor itself is impervious to the effects of water guaranteeing long service life even in areas of high humidity, which can cause condensation. The all welded electronics enclosure is completely segregated from all other areas with the electronics themselves designed to provide fast switch on and settling to ensure maximum battery life and ease of calibration.

Key features:

2400 Slimline Borehole
Triple sealed to ensure immersible integrity
<10 mseconds switch on/settling period
3/4 inch diameter

Specifications:
Input
- Pressure Range 0 to 13 Ft to 0 to 686 Ft.WG
0 to 32, 65, 162, 325, 656 Ft.WG
- Proof Pressure 1.5 x Fs nominal range
- Burst Pressure 3 x Fs
- Fatigue Life Designed for more than 100 million FS cycles
Performance
- Long Term Drift 0.2% FS/year (non-cumulative)
- Accuracy 0.25% FS typical
- Thermal Error 0.5% Typical (30° - 120°F)
- Compensated Temperature 15° to 120°F (-10 to +50°C)
- Operating Temperatures -40° to 180°F (-40 to +80°C)
- Warm up Time <10m seconds
- Zero Tolerance 1% of span
Mechanical Configuration
- Pressure Port G1/4 ”AT external fitted with nosecone
- Wetted Parts 316 Stainless Steel, Polyurethane, Acetal
- Electrical Connection Polyurethane Cable
- Enclosure IP68 immersible to 200mwg
- Vibration 35g peak sinusoidal, 5 to 2000 Hz
- Shock Withstands free fall to IEC 68-2-32 procedure 1
- Approvals CE
- Weight Approx. 100 grams (additional; cable 75 g/m)
Voltage Output Units
- Output 0 to 10V
- Supply Voltage (Vs) 13 to 28 Vdc
- Supply Voltage Sensitivity 0.026% span/V
- Min. Load Resistance (FS output / 2) Kohms
- Current Consumption Approx 6 mA @ 8Vdc
Current Output Units
- Output 4-20 mA (2 wire)
- Supply Voltage (Vs) 24 Vdc, (8-28 Vdc)
- Supply Voltage Sensitivity 0.026% span/V
- Max. Loop Resistance (Vs-7) x 50 ohms
Millivolt Units
- Output 100mV ±1mV
- Supply Voltage 10Vdc regulated (15Vdc max)
- Bridge Resistance 3K5 ± 20% @ 25°C

List of all articles from this supplier

- Temperature switch for harsh applications
- Fluid sensors and controls
- Fluid flow switches and sensors
- Level sensors for fluid monitoring applications

List of all articles from this supplier

List of articles in this sub-category

- 5VDC Output IS® Pressure Transducer
- Gas Turbine IS® Pressure Transducer
- Rumble IS® Pressure Transducer
- Synchro Type IS® Pressure Transducer
- 8201 N Precision Pressure Transducer
- HR High Pressure Reactors and Autoclaves

List of all articles in this sub-category Pressure measurement

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category