High speed microplate handling

BUYER'S GUIDE

PRINT

BACK

SWAP External Gripper

MICROPLATE HANDLING PERFORMANCE:
High speed microplate handling (>100 plates/hour)
Continuous loading/unloading of Hamilton MICROLAB workstations
Grips microplates in landscape or portrait orientations
Built-in sensor detects microplates for a secure grip
Maintains grip during power failures
Quiet operation
Easy programming, on-screen or with optional teaching device
Two models available with track lengths of 420 or 1400mm
Operating data Power: <200 VA
Mains voltage: 100-240 V ~ -15% +10%
Mains frequency: 50-60 Hz + 5%
Fuses: T2L250
Environmental conditions Temperature of work area : functional from +15 to +35°C
Relative humidity : 30% - 85%, non-condensing
Over voltage category: II
Degree of pollution: 2
Measurements / Design Length of housing: ML SWAP 420 : 750mm ML SWAP 1400 : 1730mm
Depth of track housing: 239mm
Overall Height: 622mm
Electronic Box: Length : 335mm
Depth : 192mm
Height : 120mm
Work surface Path length X-Axis : ML SWAP 420 : 420mm
ML SWAP 1400: 1400mm
Y-Axis : 235mm
Z-Axis : 310mm
Radial movement: 272,5°
Transport of Objects SWAP can handle and transport all standard microtiter plates (portrait and landscape). Special adaptations for a specific object are available.

Gripper The force of the gripper can be adjusted with the Firmware (see KUST Microlab® SWAP).
No loss of the transport object in the case of power failure.
Resolution X-Axis : 0.1 mm / Step
Y-Axis : 0.1 mm / Step
Z-Axis : 0.1 mm / Step
Turning : 0.018° / Step
All axes with step control.
Accuracy/Precision Accuracy better than 0.15mm (After adjustment by the Software)
Standard deviation : 0.05mm
Speed Transport of a plate with : X-range of 420 mm and turning of 180° (parallel) and Y-range of 230 mm and Z-range of 300 mm (parallel) less than 7 sec.
Noise Level Noise level less than 60dB(A)
Interfaces The Electronic Box has the following interfaces:
RS232 Input (9-pole D-SUB-Connector)
CAN Input (9-pole D-SUB-Connector)
CAN Output (9-pole D-SUB-Connector)

Article from Hamilton

List of all articles from this supplier

- The MICROLAB 4200 SPE delivers consistent column-based solid phase extraction
- Multiflex modules for plate or tip rack stacking
- Fast, small footprint liquid handling workstation
- Microlab 4000 : flexible instrument for sample processing

List of all articles from this supplier

List of articles in this sub-category

- Tracker TRxD coded tube reader
- Microplates for sample storage
- New selection of high binding filtration plates ..
- Conductive storage rack enhances automated liquid level detection ..
- Thermobond manual heat sealer
- Microplate sample preparation systems

List of all articles in this sub-category Microplate technology

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category