Category : Opto-mechanics (components and systems) > Optical mounts

PRINT

BACK

The K100 kinematic mirror mount is intended for circular mirrors in three sizes, 4“, 5“, and 6“. The mirror holder is designed that the mirror can be fitted directly in the holder. To minimise deformation the clamping system, which exists of a plastic screw and two pins, generates low forces. Like the other mounts, the K 100 is also available either with fine adjustment screws, or micrometers. The centre heights for the K 100 have been chosen so that, for the 4“ size the height without a base plate is 65 mm, and when mounted on a slide 90, 105 mm, which corresponds to the system height for SYS 90. When mounted on 15 mm base plates, the 5“ and 6“ sizes also have a centre height of 105 mm.

List of all articles from this supplier

- NAGO-P24-8 Goniometer
- OWISoft Control Software
- XY Stage KTM 40 Motorized Positioning System
- SYS 40 Optical Beam Handling Systems

List of all articles from this supplier

List of articles in this sub-category

- Newport To Introduce the New Vizix™ Series Kinematic Optical Mounts
- Mirror Mounts
- Mirror Mounts for Parabolic and Flat Mirrors
- High Stability Kinematic Mirror Mounts
- Singular circular variable filter wheel mount
- T-MM Mirror mounts with built-in controllers

List of all articles in this sub-category Optical mounts

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category