Category : Cameras, image sensors, imaging systems, scanners, thermography, UV viewers > Cameras (CMOS, CCD..)

PRINT

BACK

Key Features:
Stand alone CCD-line scan camera.
All clock signals included.
Analog output with pixel clock.
Start of frame output.
Selectable exposure time and pixel clock.
Exposure time down to 4.2 µs.
Requires + 5 V only (LCCD 2048A -200).
Low cost.

Overview:

The LCCD 2048 A is an easy to use, complete ccd linescan camera on a single 67.5 mm x 31.5 mm sized printed circuit board.

The LCCD-2048 x was designed to provide a very low cost ccd-linescan camera for application like education or the use as sensor in low volume production instruments.

The LCCD 2048 A updates the LCCD 2048 series offering lower exposure times and improved interfaces. The new LCCD 2048A-200 requires + 5 V / 200 mA for operation only.

The new LCCD 2048 S has the same features as the LCCD 2048A-14 but provides additional selectable shutter operation offering down to 4.2 µs exposure time.

For operation the LCCD requires power only, additional logic is not required. To provide more flexibility the LCCD has an interface to control exposure time and pixel clock. All inputs are connected to internal pull up resistors, so they can left unconnected if not required.

List of all articles from this supplier

- PCI-CCD 2048 CCD-line scan camera system
- ISA-5211 signal aquisition plug-in board
- Quantum Leap high speed image intensifier system
- Intelligent ICCD Cameras

List of all articles from this supplier

List of articles in this sub-category

- New Ultra High Sensitive Megapixel CCD Sensor
- ICAM-MR1 camera
- ICAM-HD1 camera
- uEye UI-1410 monochrome camera
- 1394b Camera for imaging applications
- CSB1000 High frame rate CMOS B/W Camera

List of all articles in this sub-category Cameras (CMOS, CCD..)

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category