LQ capacitors designed for DC application

PRINT

BACK

Type LQ capacitors are designed for DC application such as filtering, bypass and coupling application. Type LQ capacitors are offered with internal construction variations designed to meet various circuit conditions. The following suffix letters identify these constructions.
Suffix "V" is extended foil (non-inductively wound), providing soldered contacts thruout. These capacitors are useful when used as a filter in a power supply which has a very low current output, or if the capacitor must supply high surge currents. They are oil impregnated, and epoxy filled.
Suffix "Y" is the standard inserted tab construction for filter and bypass applications and are oil impregnated, and epoxy filled.
The Case is a black phenolic shell. The epoxy end fill is heat resistant and provides a positive seal to the phenolic shell.
Impregnant used for suffix types "V" and "Y" is a highly refined, purified and inhibited combination of natural mineral oil and a synthetic oil, the flash point is greater than 145篊 when measured per method 110.3.4 of specification VV-L-791.
Mounting Position all types LQ capacitors will operate satisfactorily in any mounting position.
Terminals are Copperweld leads. The wire gauge and length used are functions of the case size; minimum of 1-3/4 inch length, #20 or #22 wire.

Article from Plastic Capacitors, Inc

List of all articles from this supplier

- LK high voltage filter capacitors
- Pulse Forming Networks designed for use in circuits
- HV-M power supplies
- High voltage filter capacitors

List of all articles from this supplier

List of articles in this sub-category

- QUANTA R 500 power supply
- CVS 24 72 DC-DC converter
- APS 12-50P power supplies
- CLES Linear power supplies
- P-Link Power Monitor
- PS-100 100W Universal Power Supply

List of all articles in this sub-category Electrical equipment for power systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category