Category :

PRINT

BACK

Recommended for on line measurement and qualifying of coatings. The interferometric instruments are ideally suited for diameter, eccentricity measurement and flaw detection of optical fibres coatings on high speed draw towers.

They offer the following features:

Coating diameter and eccentricity measurement
Two axes absolute diameter measurement within ±0.3 µm.
Two axes eccentricity measurement of any coating layer ±0.5µm.
Fibre vibration measurement independent.
X-Y analog measurement band pass of 10 Khz.
Event recording.
Statistics computing

High speed measurement and defect detection (70 KHz)
Diameter and eccentricity measurement on nominal diameter.
Detection of external defects: lumps, necks, scratches
Detection of internal defects: glass airline and coating bubbles, delaminations, inclusions.
Real time event recording

Other function
Fiber feed pulse counting for length and speed computing.

Outputs
Analog diameter measurement of ±10V.
Eccentricity analog modulus of 0-10V.
X and Y fiber position analog outputs ±10V, 10Khz.
Digital outputs: alarms, defects.
RS232C serial link : access to internal parameters and measurement results.

List of all articles from this supplier

- Fiber Eccentricity Display - CERSA MCI
- Fiber Eccentricity Measurement - CERSA MCI
- Non Contact Tension Measurement
- Laser Interferometric Sensor for Glass

List of all articles from this supplier

List of articles in this sub-category

- Titan Fiber Optic Back Light Illumination System
- MIST-XL
- 4°C TempShell
- Werth Fixed Bridge ProbeCheck – Werth
- Ultrasonic sensor for water level or snow depth measurement
- Advantech Launches PCI-1622CU

List of all articles in this sub-category

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category