Category : Laser components, systems, equipment and applications > Laser components and systems

PRINT

BACK

Laser head blocks, which house the reflective cavity, rod, and lamp are typically machined from non-corroding metals or plastics. Metals are more durable than plastics but have the drawback of being electrically conductive. Extra care must be taken with the design of lamp connector insulation to accommodate metal head assemblies. Plastic heads are electrically insular but are more susceptible to degradation caused by long term exposure to ultraviolet lamp radiationHead block manufacturing requires fairly complex machining of various openings, grooves, slots, cooling channels, etc., which are necessary to accurately capture the cavity, lamp, rod, and flow tube assemblies for ease of installation and alignment, and maximum cooling water flow. The various openings are sealed with gaskets and O-Rings which are available in kits.

List of all articles from this supplier

- Particle filters
- Mounted rods
- Internal Mirrors
- DC Arclamps

List of all articles from this supplier

List of articles in this sub-category

- TTS series Laser system designed for vision system applications
- C1000E laser system
- Industrial Fibre Lasers
- 1550nm Compact Fiber Laser System
- CAPRIS CP2 Twin Coil Pan System
- Sienna 55 laser wire stripper

List of all articles in this sub-category Laser components and systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category