Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Level sensors, detection & measurement

PRINT

BACK

Continuous measurement or level detection on conductive or insulating products: liquids, granulates, and powders
Rigid or cable electrodes
Double Electrode for a non-conducting container
High temperature extension
Presentation

A measurement or capacity detection channel is made up of :

A sensor head: Polycarbonate box IP 65,
A connection fitting (G1 1/2 as standard),
A rigid or cabled electrode in contact with the product,
The electronics are fitted in the sensor head or remotely in a leak-tight box with a coaxial cable link.
How it works

The sensor, the tank and the product being measured form a condensor whose capacity depends on how full it is, so variations in the height of the product lead to variations in capacity. This capacity variation is converted into an on/off signal and an analogue signal for continuous level measurement.

List of all articles from this supplier

- Pressure indicators
- Pressure measurement instrumentations
- Simple and economic solution to level detection
- Floor water detector

List of all articles from this supplier

List of articles in this sub-category

- Enhanced Jupiter® Magnetostrictive Level Transmitters
- Atlas™ Magnetic Level Indicator
- Model T10 Float Level Switch
- Model B73 Sealed External Cage Liquid Level Switches
- Top Mounting Displacer
- APM Pneumatic Modulevel For Boiler Feed Systems

List of all articles in this sub-category Level sensors, detection & measurement

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category