Category : Optics (components, coatings, instruments and systems) > Optical lenses, mirrors, (auto)collimators

PRINT

BACK

MC3-03X Zero Distortion MACRO lens is an opto-mechanical component used to look at different object sizes: from 3 up to 26 mm on a 2/3” detector (and proportionally less on
smaller size detectors). Through an adjustable knob, the desired magnification can be set and the best focus position adjusted: once the best focus is found, the moving element can
be blocked by a screw- knob. With additional spacers, included in the product package, it is possible to select the required range of magnification.As the magnification increases, the Fnumber becomes higher in order to keep a good field depth without significant
compromises on image resolution and image brightness. While the magnification changes, the distortion remains nearly ZERO, making this lens perfectly adequate for measurement applications. A diffusive ring illuminator, perfectly fitting the lens mechanics, is
available as an accessory.

List of all articles from this supplier

- Diffuse illuminators for back lighting
- Ring LED Illuminators
- LT CX series Coaxial Illuminators
- MC series macro lenses designed to look at very small objects

List of all articles from this supplier

List of articles in this sub-category

- Non-polarizing Beamsplitter Cubes
- Aspheric Lenses from Optarius
- Broadband Dielectric Mirror
- TEC Telecentric System for macro imaging
- VS-L1035 Series Low Distortion Lens for Line Scan Sensor
- VS-TC series Telecentric Lenses

List of all articles in this sub-category Optical lenses, mirrors, (auto)collimators

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category