Category : Environmental measurement, test and control equipment > Leak detection systems

PRINT

BACK

The MF-11 performs fast, accurate leak tests with either air or nitrogen. It utilizes our ultrafast mass flow test method in which a constant pressure is maintained to the test part by a precision pressure regulator. Any make-up air that may be required — because of a leak, after the initial adiabatic heating stabilization — is measured by VIC’s patented mass flow sensor. Results are indicated via digital leak readout in cc/minute. MF-11 is a low cost system, complete and ready-to-use.
• Fast and accurate leak tests using air or nitrogen
• The least expensive leak tester and the simplest to set-up and operate
• Fast-Complete test cycles in seconds
• Fast response time mass flowmeter
• Leak rate sensitivity from 1cc/minute
• Patented mass flow sensor
Options include an adjustable setpoint with Go/No-Go indicator lights, calibrated leak orifice with NIST calibration certificate; 220 VAC power; and a handheld digital leak rate calibrator.

List of all articles from this supplier

- MLC Multi-Lumen Catheter MLC Series Air Leak Detectors
- Smart Charge II™ Tracer Gas Charging System
- MS-50 Dry Console high-speed production leak detector
- MS-60 portable helium leak detector

List of all articles from this supplier

List of articles in this sub-category

- BigEZ Multi-Dose Dye Injection System
- TP-9370 Marksman Ultrasonic Diagnostic Tool
- Tracer-Charge for leak detection
- TP-9360 Pro-Alert leak detector
- Customised machine for leak test
- T1VE-S leak tester

List of all articles in this sub-category Leak detection systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category