Category : Environmental measurement, test and control equipment > Leak detection systems

PRINT

BACK

The FDA requires process validation of medical devices such as a multi-lumen catheter, and, the design of a multi-lumen catheter must permit each lumen to be tested during the production process. Our Multi-lumen Catheter Leak Test System (MLC) provides an efficient and convenient way to validate up to 5 lumen catheters simultaneously. It uses dry air, or any gas, to automatically perform three tests on each lumen for:
• external leakage
• inter-lumen leakage
• flow test for occlusions
For greater productivity, a second station can be added to the MLC System so that one station is leak testing while the other is unloaded/loaded. Automatic removal of the fittings from the tester at the end of test is another option that accelerates the testing process
Fully automated leak and flow test
• Fast—complete test cycles in seconds
• Easy to operate
• 2, 3, 4 or 5 lumen catheters
• Leak rate sensitivity from 1cc/minute
• Pneumatic testing uses dry air or any gas
• Direct readout of leakage in cc/minute and flow rates in liters/minute (or other units if desired)
• Optional digital printout for permanent record

List of all articles from this supplier

- MF-11 Air or Nitrogen Leak Tester
- Smart Charge II™ Tracer Gas Charging System
- MS-50 Dry Console high-speed production leak detector
- MS-60 portable helium leak detector

List of all articles from this supplier

List of articles in this sub-category

- BigEZ Multi-Dose Dye Injection System
- TP-9370 Marksman Ultrasonic Diagnostic Tool
- Tracer-Charge for leak detection
- TP-9360 Pro-Alert leak detector
- Customised machine for leak test
- T1VE-S leak tester

List of all articles in this sub-category Leak detection systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category