Category : Machine vision related products, inspection applications with industrial vision or scanning systems > Inspection systems

PRINT

BACK

K9APE® Machine Vision Inspection Systems are readily adapted for inspection of precision parts with 360° convex surfaces - such as electric motor commutators and slip rings mounted on armatures. Inspection can occur during or after the manufacturing process.

The images shown below are from an armature of a used fractional horsepower electric motor and highlight its commutator. When installed in a motor, the copper commutator interfaces with a pair of carbon brushes (not shown) to carry current to windings (green wire) that magnetize the armature. The commutator must have a smooth, defect-free surface that is concentric with the armature's shaft to provide efficient, reliable and quiet motor operation.
High-resolution 360° images of the surfaces of commutators were captured with our K9APE® Machine Vision Inspection System. A highly compressed image of a commutator of a typical part is shown below. Small defects that could readily escape notice by human inspectors were readily detected on uncompressed images

List of all articles from this supplier

- Crankshaft bearing
- Machine Vision Inspection System For Machined Bores
- Machine Vision Inspection System For Convex Surfaces
- Machine Vision Inspection Systems for Test Tubes

List of all articles from this supplier

List of articles in this sub-category

- SPI 2000 Automatic Test Machine for Laser Welding Spots
- IPD i-Gauge designed to simplify the deployment of machine vision in industrial gauging applications
- Fuel injection system
- Automobile exhaust systems
- Savi powerful vision controller
- Magnetic V-Block tool for inspection

List of all articles in this sub-category Inspection systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category