|
Category : Machine vision related products, inspection applications with industrial vision or scanning systems > Inspection systems
Machine Vision Inspection System For Machined Bores
|
|
 |
| PRINT |
|
 |
| BACK |
|
K9APE® Machine Vision Inspection Systems are readily adapted for inspection of concave cylindrical products - such as machined bores. Inspection can occur during or after the manufacturing process.
The image shown below is of a 1 inch (25 mm) complex machined valve bore having several different diameters in a casting
Our K9APE® Machine Vision Inspection System generated the following image of the top surface and the complete 360 degree side wall of the machined valve bore.
List of all articles from this supplier
- Crankshaft bearing
- Machine Vision Inspection System For Convex Surfaces
- Machine Vision Inspection Systems for Test Tubes
- Machine Vision Inspection Systems for Commutators & Slip Rings
List of all articles from this supplier
List of articles in this sub-category
- SPI 2000 Automatic Test Machine for Laser Welding Spots
- IPD i-Gauge designed to simplify the deployment of machine vision in industrial gauging applications
- Fuel injection system
- Automobile exhaust systems
- Savi powerful vision controller
- Magnetic V-Block tool for inspection
List
of all articles in this sub-category Inspection systems
List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category
|
