Category : General industrial equipment, special machines > Screw driving units

PRINT

BACK

The QC Screwdriver of the MINIMAT-series is a pneumatic tool with control functions for a 100% process quality of assemblies. In addition, the manual QC Screwdriver is able to register the reached torque values, achieved with the highly precise shut-off clutch. Based on a strain gage torque transducer the values can be displayed and stored via the respectively connected measuring electronic of the new controller family, type ME 1000 QC.
Additionally, the ME1000 QC allows the evaluation and registration of the torque values, direction of rotation, cycle time and OKAY assembly per part.
The screw tightening result will be evaluated and indicated directly on the screwdriver with green or red LEDs. Torque and cycle time resp. OKAY/NOT-OKAY status will be shown on the controller's display and stored. Various statistical evaluations can be done directly at the controller.
The OKAY/NOT-OKAY evaluation is done by comparing the actually achieved values with the specified and preset limit values stored for torque, cycle time and number of assemblies per work piece. The values for cycle time and torque can be entered directly or determined automatically via a teach mode.
In case of NOT-OKAY assemblies, the controller's display will indicate the reasons for the failure:
Cycle time too long/too short,
Torque too low / too high,
Incorrect direction of rotation,
Work piece removed too early
In case of incorrect assemblies, the value integrated into the screwdriver will block the air supply until the failure is reset on the controller.

List of all articles from this supplier

- Chipping Hammers
- Stainless Steel Air Vane Motors
- Stationary Feeding Machines
- Micromat screwdrivers

List of all articles from this supplier

List of articles in this sub-category

- Screw drivers
- Micromat screwdrivers
- Cosberg manual screw driving units

List of all articles in this sub-category Screw driving units

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category