Model 451 Electrolytic Crystal Polisher

PRINT

BACK

The Model 451 is used for damage free machining of materials by electrolytic or chemical action to produce flat, polished and precisely oriented surfaces. It was designed for damage free surface polishing of soft materials such as copper, zinc, lead, silver and indium, but can be used to polish any material that has a solvent that will not attack the PVC or stainless steel from which the Model 451 is constructed. When used in conjunction with the Model 750 Acid Saw, damage free thin sections, cubes and parallelepipeds can be produced. Although preparation rates will vary with materials and solvents, crystals may be machined without changing their dislocation density at a typical rate of 0.001" per minute.

Article from South Bay Technology

List of all articles from this supplier

- Model 650 Low Speed Diamond Wheel Saw
- Model 360 Rotary Disc Cutter
- MS 534B Spark Erosion Machine
- Model 170 lapping and polishing system

List of all articles from this supplier

List of articles in this sub-category

- Newport Introduces the 1936-C and 2936-C Benchtop Optical Power and Energy Meters
- Iris Diaphragms
- Newport introduces 1918-C Handheld Optical Power and Energy Meter
- Safety Machine Windows
- Adaptors for coaxial incident light
- Modular directed lighting

List of all articles in this sub-category Optical instrumentation, systems and accessories

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category