Category : General industrial equipment, special machines > Vacuum furnaces

PRINT

BACK

The Centorr Model 5TA Reed Tri-Arc Furnace is a natural evolution of the Centorr Model 5SA Single Arc Furnace. The furnace system consists of the Tri-Arc Furnace, a Resistor box, a D.C. power supply and a set of water cooled power cables to bring power and water to the furnace. Because of its simplicity, ease of access, and small column, the furnace is easily purged. Work specimens are, therefore, quickly prepared, with a very high degree of purity maintained from sample to sample.

Our Model 5Ta Reed Tri-Arc Furnace was developed for the scientist engaged in high temperature work requiring more elaborate apparatus than that normally used for arc melting applications. (For the everyday arc melting applications, see our data sheet on the Centorr Model 5SA Single Arc Furnace).

The three electrodes, equally displaced around the top of the furnace, allow access access into the furnace along is central vertical axis for crystal pulling rods, splat rods, thermocouples, etc. Heating the specimen from the outside inward permits more even heating and maintains the specimen in a molten state longer.

List of all articles from this supplier

- Series 16 laboratory furnaces
- Series 11 Furnaces
- Series M60 furnace
- Series 10 vacuum furnaces

List of all articles from this supplier

List of articles in this sub-category

- Series 11 Furnaces
- Series M60 furnace
- Series 10 vacuum furnaces
- PVD coating machine with a simple and compact design
- Tempering furnace
- B16-TH oil quenching furnace

List of all articles in this sub-category Vacuum furnaces

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category