Category : Laser components, systems, equipment and applications > Laser components and systems

PRINT

BACK

The Mark-Tech Model 7700 Centering Readout is part of a system for precision 2-axis alignment using a laser beam. In the basic configuration - as the display device for the Mark-Tech 6400 Tooling Laser System - the 7700 is used with a tooling laser and a detector target. The laser generates an optical centerline. The traget is placed in this centerline facing the laser beam. The 7700 readout indicates displacement of the target in two perpendicular axes.

The Centering Detector has two independant digital displays, each of which are calibrated in mils (.001 inch) displacement. Each displays a maximum of 199.9 mils on each side of center. Two separate detector targets may be connected to the 7700: a front panel switch selects one for display.

List of all articles from this supplier

- Model 6418 Vertical Mirror
- Model 6450 autoreflecting laser
- MODEL 7740 Tooling laser alignment system
- 7900 Frequency stabilized laser ™

List of all articles from this supplier

List of articles in this sub-category

- TTS series Laser system designed for vision system applications
- C1000E laser system
- Industrial Fibre Lasers
- 1550nm Compact Fiber Laser System
- CAPRIS CP2 Twin Coil Pan System
- Sienna 55 laser wire stripper

List of all articles in this sub-category Laser components and systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category