Category : Electrical and electronic equipment & instrumentations > Components

PRINT

BACK

The Model M-50 Benchtop Electromagnet has been designed for use with MMR's Low Temperature Hall System, the LTHS refrigerator and Dewar mount between the poles of the magnet. The magnet may also be used for a variety of other laboratory applications. It requires neither water nor fan cooling. It is a compact, efficient magnet standing only 7.5" high, and occupies only 7" x 14" of bench space. It provides a vertical field of 4250 gauss between flat 2.5" x 3.0" polepieces with a 0.75" gap at 8 amps. The size of the gap can be increased using special shims. The Magnet is designed to be used with MMR's MPS-50 Programmable Power Supply, and the LTHS-D Hall System Dewar, to provide rapid and simple determination of Hall mobilities of semiconductors over a wide range of sample temperatures from 70 K to 400* K.

Features
Compatible with MMR MPS-50 Magnet Power Supply
Maximum Current: ± 8 amps at 32 volts.
Reversal Time (+3500 to -3500 gauss): 2 seconds.
Pole Piece Dimensions: 2.5" x 3.0"
Operating Temperature: 0 ° C- 50 ° C.
Weight 36.5 Kg (80 lbs).

List of all articles from this supplier

- MMR two-stage micro miniature refrigerator
- LTHS Dewar low profile dewar designed for fit between the poles of a magnet
- K-77 Manual Temperature Controller
- X-Ray Diffractometer Cold Stage

List of all articles from this supplier

List of articles in this sub-category

- BCS-SOL5 Photovoltaic Plug Connector
- PH CONNECTORS
- Round plug connectors
- Coaxial Connectors
- Power plug connectors
- Büschel plugs

List of all articles in this sub-category Components

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category