Category : Electrical and electronic equipment & instrumentations > Electrical equipment for power systems

PRINT

BACK

Operating mode

The power supply delivers a stabilized current from 0.1 % to 100 % of In (In = nominal current) for the monopolar power supplies and from ± 0.1 % to ± 100 % for the bipolar power supplies.

In local control mode, the current is settled by two potentiometers (100 % and 1 %) ; as regards the bipolar supplies, the polarity is defined by a switch on the front panel.

In remote control mode, the current varies according to the external control signal. Its value ranges from 0 to + 10 V for monopolar power supplies and from -10 V and + 10 V for bipolar power supplies to enable a true zero crossing.

The basic mode is a current regulation with a voltage limitation adjusted at 110 % of the nominal output voltage (rectangular characteristic).

The I and U monitors are available..

List of all articles from this supplier

- Magnetic characterization of materials
- Calibration temperature sensors

List of all articles from this supplier

List of articles in this sub-category

- QUANTA R 500 power supply
- CVS 24 72 DC-DC converter
- APS 12-50P power supplies
- CLES Linear power supplies
- P-Link Power Monitor
- PS-100 100W Universal Power Supply

List of all articles in this sub-category Electrical equipment for power systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category