The OWIS Nano Goniometer NAGO P 24-8 is equipped with a piezo inertial drive. The adjustment range is 0.11 rad by speed about 20 mrad/s. The smallest step angle is about 2 µrad. The distance between the center of rotation to bottom is 85mm. Combined with the Nano-Goniometer NAGO-T24-8 they are building a theta-phi goniometer. The NAGO-P 24-8 is also available with an integrated measuring system by the same dimensions. The combination of the nanopositioner on top of the goniometer is possible without adapter plate. In order to firmly assembly the NAGO P 24-8 you can use the mounting plate NMP 50 (grid dimensions 50 mm) which is available as an accessory. To actuate the NAGO P 24-8, the manual control unit NHS06 is available. With it you can actuate two groups of three nanopositioners. The NHS 06 has a USB interface, to actuate the goniometer with the delivered software. For closed loop operation, an integrated measuring system and the evaluation unit MSAW is required.
• increments of 2 µrad and 6 µrad with manual control unit NHS 06
• high speed in full step motion
• main body and carriage made of wear resistant aluminium alloy, black anodized
• high linearity of the step sizes at constant control voltage and frequency
• optional measuring system with a resolution of about 3 µrad
• versions for use in vacuum available
• increments of 2 µrad and 6 µrad with manual control unit NHS 06
• high speed in full step motion
• main body and carriage made of wear resistant aluminium alloy, black anodized
• high linearity of the step sizes at constant control voltage and frequency
• optional measuring system with a resolution of about 3 µrad
• versions for use in vacuum available
The OWIS Nano Goniometer NAGO P 24-8 is equipped with a piezo inertial drive. The adjustment range is 0.11 rad by speed about 20 mrad/s. The smallest ... >>>Read full article