Category : Laser components, systems, equipment and applications > Laser components and systems

PRINT

BACK

The hybrid laser system NT-H is available in two completely different versions that can fulfil the following measuring tasks:
1. When installed in the beam axis direction the laser system is capable of monitoring the 3rd axis. With this version thermal compensation of 3 axes can be determined for a machining centre.
(Fig. 1).
2. When installed at 90° to the laser beam the hybrid system is used to perfect the absolute accuracy of smallest tools in mould and die production.
In this application the "optical fault“ which results from the relative (final) size of the focused laser measuring point to the tool tip will be measured and compensated for by the probe (Fig. 2).
Both measuring tasks will be supported by the appropriate software cycles from Blum.

List of all articles from this supplier

- Pulse and Burst Test Stands
- Z-Nano Probe for precise automatic tool lenght measurement
- TC51 Workpiece Touch Probes
- LM 100 versatile laser micrometer system

List of all articles from this supplier

List of articles in this sub-category

- TTS series Laser system designed for vision system applications
- C1000E laser system
- Industrial Fibre Lasers
- 1550nm Compact Fiber Laser System
- CAPRIS CP2 Twin Coil Pan System
- Sienna 55 laser wire stripper

List of all articles in this sub-category Laser components and systems

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category