Category : Electric DC motor, linear motor, stepper motor, transmission, drives & control, cylinder, gearbox > Motor controllers & drivers

PRINT

BACK

The OSC-462H Analog Speed Control Interface Board offers the system designer the capability of adding low cost, intelligent velocity control to the IB462He Half/Full Step Hybrid Motor Driver (sold separately). The OSC-462H is powered by a single +12 to +48 VDC power supply, which will also provide power for the IB462He driver.

The OSC-462H features a digital oscillator for accurate velocity control with an output frequency of up to 60 kilohertz. Output frequency will vary with the voltage level on the speed control input. The speed control input can be adjusted by using a 10k potentiometer or by directly applying 0 to +5 volts to the input.
There are two basic modes of operation: bidirectional and unidirectional. In bidirectional mode, both speed and direction are controlled by the speed control input. In unidirectional mode, only velocity is controlled by the speed control input; direction is controlled by a separate input.

List of all articles from this supplier

- Hybrid Stepping Motors
- MDrive14 Planetary Gearbox
- Isolated Digital I/O module
- IM481H PLUS microstepping driver

List of all articles from this supplier

List of articles in this sub-category

- Machine controllers
- Motors and controllers
- Control speed of Pittman GM9500 motors
- VXM 12288 Stepping Motor Controller
- DEC 70/10 Brushless Motor Controller
- Motor Controllers

List of all articles in this sub-category Motor controllers & drivers

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category