Category : Motion control, positioning stages > Computer-controlled positioning equipment

PRINT

BACK

The software tool OWISoft allows the configuration and operation of several OWIS control units of the type DC 500 (V 2.5 and higher), SMS 60 (V 2.4 and higher). The settings can be stored. All linear and rotative OWIS positioning units are stored in the program database. They can be called, modified and then operated by the control unit. The program can execute and asynchronously approach up to 12 axes. The joystick modus is supported. Technical Requirements OWISoft can be installed on a commercially available PC. Hardware Configuration At least a Pentium 233 MHz (or compatible) with 64 MB RAM and 45 MB fixed-disk storage is to be used. Interfaces The DC 500 and the SMS 60 can be connected over a RS 232 or a GPIB interface (only with drivers made by National Instruments NI-GPIB). Software OWISoft is written for Windows operating systems and operates under Win 95/II, Win 98, WinME, WinNT4.0, Win2000 and WinXP. We suggest a screen resolution of 1024x768 pixels, with 24-bit colour depth.

• software tool for OWIS controls DC 500, SMS 60
• up to 12 controls can be managed
• comfortable operation of positioning units
• integrated motion applications: - Meander - Chain - Program
• user language both German and English

List of all articles from this supplier

- NAGO-P24-8 Goniometer
- XY Stage KTM 40 Motorized Positioning System
- K100 kinematic mirror mount
- SYS 40 Optical Beam Handling Systems

List of all articles from this supplier

List of articles in this sub-category

- Series TLP Positioning systems
- RT3A 200 Rotary tables
- PA 25 50 100 Press axis
- Motorized precision slides usable for all positioning purpose
- DS Compact positioning system
- DST and DSK Positioning system

List of all articles in this sub-category Computer-controlled positioning equipment

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category