Category : Bioscience, biotechnology, life health science (precision equipment, instruments, devices and accessories) > Tissue slicers

PRINT

BACK

All New Innovative State-of-the-Art Oscillating Tissue Slicers
The EMS Oscillating Tissue Slicers for the most challenging of sectioning with the highest quality.
The EMS 4500 and 5000 Oscillating Tissue Slicer represents the most thoughtfully designed solution to sectioning either fixed or fresh tissue, as thin as 5 microns. No longer is there a need for embedding or freezing your sample and preparation time is reduced dramatically. The risk of distortion and artifacts normally associated with these procedures are eliminated. The EMS 4500 and 5000 meets the highest standards for precision and accuracy and it meets or exceeds the performance of units on the market costing twice as much.

The EMS Tissue Slicer Family……..
The EMS 5000 series may be used for the sectioning of samples for use in the fields of electrophysiology of fresh tissue, immunocytochemistry and immunohistochemistry, Neurophysiology, Neuropathology, Experimental Biology, Histology, Cytology, Botanical Research, Microscopy, Polymer and Materials Science. The EMS 5000 now features a new innovative design of the slicer head which minimizes Z-Axis vibration. This improvement dramatically improves slice surface integrity and is especially beneficial in the field of fresh tissue where IR/DIC imaging methods are concerned. The unique blade holder has now been modified to accept: razor, sapphire, diamond and glass blades.

To reduce time between slices the EMS 5000 series features a user programmable travel window (cutting window). This allows the sectioning cutting range of the blade to be customized to the specimen sample. This feature of “automatic sectioning” offers a beginning advance and end advance further automating the EMS 5000. In conjunction with our “home button” the programmable window guarantees rapid sectioning of even the largest of specimens. As well, the EMS 5000 allows the sectioning of samples in two different modes. In single slice mode, the unit sections samples and harvests them while the blade repositions itself to perform the next slice and in the multiple slice mode the EMS 5000 will automatically perform multiple uniform slices.

The EMS 5000 series control panel has been totally redesigned to allow for ambidextrous and ergonomic operation. The keypad has been sealed to avoid buffer spill seepage. The tray is made from molded clear polycarbonate for improved viewing of the slicing operation. The tray is removable to facilitate specimen mounting and cleaning. Two white LED’s are installed in the blade head, which provide constant cold illumination of the specimen during the slicing process.

The EMS 5000 series is engineered for maximum stability ensures even the most delicate of tissue to be cut successfully every time. The knife holder allows any blade (as per list) to be secured and the blade angle set from 10- 20 degrees. The specimen mount is x, y, z axis adjustable and the knife advance is continuously adjustable with a touch of the keypad from 0- 5mm/s and the section thickness is now adjustable in 1 micron increments ranging from 1-999 microns. Our precision slicer features automatic touch selection of section thickness, blade speed, advance, and a user-defined travel window so that the consecutive sections may be cut easily and rapidly. Other EMS 5000 features include: Touch pad control of the blade height, slice counter / slice thickness, precise bar graph displays of blade oscillation and advance speeds. Blade oscillation is adjustable from 50-5000 cycles/minute and advance speed is adjustable continuously from 100 microns - 5mm/sec.

Our EMS 5000 series is designed for easy operation and maintenance. The specimen collecting tray is removable and easy to clean. All controls may be set with one hand with options for multiple slicing modes.

The unit comes complete with gooseneck magnifying lens, media tray (2.5” wide) and pedestal, specimen vice holder, blocks, as well as a foot switch with 6’ cable. A large tray (3.5” wide) is available as an option and comes complete with fixed stage and adjustable pedestals.

The tissue pedestal with pivotal pin (included with media tray), allows for the mounting of a specimen directly to the pedestal and the ability to change the angle of your specimen relative to the blade, offering you perfect specimen orientation. The sample vice with pivotal pins (also included in package) allows for the adherence of your specimen directly to a mounting block.

The EMS 5000 series meets the highest standards for precision and accuracy. It meets or exceeds the performance of units on the market costing twice as much.

Updates and Advantages of the EMS 5000 Series
Cutting window for automatic sectioning allows for faster and more reliable sectioning.
Control pad with membrane buttons is now separated from the slicer module improving ergonomics and reducing buffer spillage from contaminating the controls.
X,Y, and Z – 3 axis adjustable specimen mount.
Easy to release slicer head for safety and ease of specimen mounting.
Slice thickness is now adjustable from 1-999 in 1 micron steps.
One touch “home” button to return the blade arm to a predetermined point near the specimen.
The specimen tray is made from a clear polycarbonate for improved viewing of the slice operation. No worry of leakage and section visualization in easy.
The pivot pins which come as a standard on the pedestal as well as the vice holder allow changing of the angle of the pedestal relative to the blade. Easy sample orientation in all directions.
The tray includes a lock on feature for a more secure mount to the platform.
The standard unit comes complete with our unique pivotal tissue pedestal (you can mount the specimen directly on the pedestal without the need for vices or blocks mounted in the sample tray).
The EMS 4500 Tissue Slicer

List of all articles from this supplier

- Retriever : solution for antigen unmasking
- Oscillating diamond knife for room temperature ultramicrotomy
- Graduated bottles used for mixing and storage of culture media
- Model 920 multi-purpose lapping machine designed for lapping and polishing a wide range of materials

List of all articles from this supplier

List of articles in this sub-category

List of all articles in this sub-category Tissue slicers

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category