Category : Instrumentations for fluid management, control and transfer (gas and liquids) > Pumps

PRINT

BACK

Benefits:
For highest transmittable torque and best run-out:
Comparable with hydraulic chucks and shrink-fit
Tool change in less than 30 seconds:
Immediate re-use - no cool down period necessary!
Clamps tool shanks down to diameter 3.0 mm
Hi-Q balancing feature - accepts REGO-FIX balancing rings:
Ideal for high speed applications
For coolant through tooling
Tool pre-setting feature
TechnicaPowered through Electrical Motor and external Gear Pump.
"Unclamping" and "clamping" through push-buttons.
Insert for the Chuck Adapter PG 10, 15 or 25
Clamping force max.: 60 kN
Working pressure PG 10 (hydraulic): 50 bar
Working pressure PG 15 and 25 (hydraulic): 150 bar
Max. pressure (hydraulic): 155 bar
Tank: 1.0 litre
Power: 0.37 kW
Revolutions PGU 6100 E: 1368 rev./min.
Revolutions PGU 6100 A: 1700 rev./min.
Mains supply PGU 6100 E: 230V/50Hz
Mains supply PGU 6100 A: 110V/60Hz

List of all articles from this supplier

- Metering Valve with Initiator
- Pneumatic Delivery Pump for Containers 1 - 5 kg
- New CoroGrip® Pneumatic Bench Pump
- Electric Guns suitable for high viscosity lubricant

List of all articles from this supplier

List of articles in this sub-category

- BPS-300 Residual and Utility Pump
- BPS-80 Compact Submersible Pump
- EL single series air pumps
- SLL series air pumps
- MK-10 and MKC-510V air pumps
- Automatic production test system for block pumps

List of all articles in this sub-category Pumps

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category