PLD-1C driver phase

PRINT

BACK

The PLD-1C driver phase locks any resonant chopper (type CH) to an external clock signal, to provide an ultra stable chopping beam motion [sub] system. The system can be used as a "stand alone" unit, in the laboratory, or can be incorporated into a larger instrument/system. The phase relationship to the clock is factory set to customer's requirements (0° to 360°), and is front panel adjustable in a range of +/-45° min. The driver can be a fully integrated driver with front panels controls and internal power supplies or a printed circuit board level driver. The dimensions of the cased driver are: 12" × 10" × 3.8". The PLD-1C-PC driver is a printed circuit board level driver which requires an external +/-15V DC power supply

Article from Electro-Optical Products Corp.

List of all articles from this supplier

- R-752 universal radiometer
- Low Cost Polygon Scanners
- Polychromatic Modulation System
- DSH-10 Driver

List of all articles from this supplier

List of articles in this sub-category

- Newport Introduces the 1936-C and 2936-C Benchtop Optical Power and Energy Meters
- Iris Diaphragms
- Newport introduces 1918-C Handheld Optical Power and Energy Meter
- Safety Machine Windows
- Adaptors for coaxial incident light
- Modular directed lighting

List of all articles in this sub-category Optical instrumentation, systems and accessories

List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category