|
Category : Measurement, test and control instrumentations > Thickness measurement equipment
Precise measurement of the individual layer thicknesses of duplex coatings
|
|
 |
| PRINT |
|
 |
| BACK |
|
The PHASCOPE® PMP10 DUPLEX has been developed for the precise measurement of the individual layer thicknesses of duplex coatings (lacquer/zinc coating system on steel or iron).
Due to the novel phase-sensitive eddy current method, it is capable of measuring very precisely zinc coatings with thicknesses between 0 µm and about 100 µm.
In this manner, it is far superior to conventional eddy current coating thickness measuring instruments that are to reduce the influence of a fluctuating zinc coating on the measurement of the lacquer thickness by a special “phase adjustment” or an increased measurement frequency.
In particular thin zinc coatings in a range of 0 – 10 µm on auto bodies can be measured very reproducibly. Typical applications are in the quality assurance of: - Auto body painting - Shopping carts and similar - Brake line tubes and many others
Zinc alloy coatings such as ZnNi or ZnFe cannot be measured due to their low electr. conductivity.
The same applies to hot-dip galvanized coatings due to diffusion coatings that are typically present and have different electr. conductivities compared to pure zinc coatings.
Article from Fischer Instrumentation Electronique
List of all articles from this supplier
- FERITSCOPE® MP30E with plug-in type smart probe
- SIGMASCOPE® SMP10, hand-held instrument to measure Electrical Conductivity
- Hardness Measurement Instruments: PICODENTOR® HM500 - Helmut Fischer
- The Coulometric testing method: COULOSCOPE® CMS STEP- Helmut fischer
- Coating thickness measuring instruments: DUALSCOPE® MP20E-S - Helmut Fischer
- Hand-Held Instruments for coating thickness measurement - ISOSCOPE® MP30E-S - Helmut Fischer
List of all articles from this supplier
List of articles in this sub-category
- MicroMesure II modular measurement system
- FG710 Infrared Gauge for film thickness measurement
- TMS200 Thickness measurement equipment
- BOLTS Ready Integrated Metrology Module
- F50 spectral reflectance system
- F20 spectrometry system
List
of all articles in this sub-category Thickness measurement equipment
List of all articles in this sub-categoryList of all articles in this sub-categoryList of all articles in this sub-category
|